Product Information

Instructions: 

Apply Stick & Press to your material at a min temp of 230F (110C) for about 15 seconds using a heat press.  Stick & Press may also be applied with a household iron at the same temp (cotton setting works well).

Ensure the shiny side of the film is placed to the backing of your material, typically down as shown below.  This product does NOT adhere to acrylic!  Use only with Leatherette (with or without gray backing) and genuine leather.  For pre-dyed leather with smooth backing, it is recommended to lightly sand back with 100grit sandpaper before applying adhesive.

 

Adhesive layer is .18mm thick to create a strong bond.

Film backing is semi-transparent, which allows easy positioning on the leather sheet.

 Recommended settings for the Hotronix's 360 IQ Hat Press:  Upper 280F, Lower 320F, Pressure 5, Time 45-55 seconds.